USA - EN
Canada - EN
Weldwood Nonflammable Contact Cement
Weldwood Nonflammable Contact Cement is a high solids polychloroprene, waterborne contact adhesive that meets the stringent requirements of the professional user. Complies with all current VOC requirements. Dries in 60-70 minutes, allowing for extra bonding time. Water resistant when dry. Exceeds industry performance requirements. Low odor. Easy water clean-up.
Key Features
-
WWNFCCement1 - Permanent Bond -
WWNFCCement2 - High Heat Resistant -
WWNFCCement3 - Water Resistant -
WWNFCCement4 - Interior/Exterior
DETAILS + SPECIFICATIONS
- Details
-
Specifications
SKU Code Unit Size Color Dimensions (in.) Weight Case Pack Cases/Pallet 7079800125 00125 55 GA NATURAL 23.5x23.5x34.25 545.65 lbs. 1 4 7079825332 25332 32 FL OZ Clear 13.5x8.75x5.25 15.75 lbs. 6 144 7079825336 25336 1 GA Natural 13.5x13.5x8 39.25 lbs. 4 45
RESOURCES + FAQs
- Technical Data
-
FAQs
Can I use this cement to bond laminate over existing laminate?
When using water-base d contact cements, at least one surface to be bonded must be porous. To install laminate over laminate, please refer to our Original or Gel Formula Contact Cements.
Can I stick the two surfaces together; can I use body weight to achieve a good bond?
Once surfaces are joined, 25 lbs. per square inch of pressure should be evenly applied to surface starting in center and working out to edges. This is equivalent to 75 lbs. of pressure being applied to a 3-inch “J” roller. Apply as much pressure as possible, being careful not to crush/damge the materials. Insufficient pressure may allow blisters or bubbles to form later.